The SilverDust IGC servo motor controller is designed to be a simple “slave” axis in a CANopen master/slave network requiring only power, comm. and CANopen to be wired. This cost effect controller can be programmed to simply respond to move commands from the CANopen bus. If only a few I/O are required, the standard 7 TTL I/O can be converted to 24V I/O using a 24V breakout QCI-BO-B52 on the SMI port.

SilverDust D2 IGC

• 7 TTL Inputs or Outputs (use QCI-BO-B52 for 24V I/O)
• 4 Analog Inputs (Joystick)
• Analog Output Option (use QCI-BO-B1A)
• RS-232 or RS-485
• ASCII, Binary, Modbus®
• CANopen
• Voltage Clamp And Resister
• Drive Enable
• DB15HD (pin): SMI Port
• DB15HD (socket): motor I/F including motor power and encoder

See Datasheet QCI-DS016 for more details.